MATERIAL SAFETY DATA SHEET

Essentially Similar to U.S. Department of Labor Form OSHA

Revised: 02/14/11

HMIS Health-1 Flammability-3 Reactivity-0

SECTION I-Product Information

Manufacturer: AVW.            

24 Hour Emergency Phone Number: 800-424-9300

Product Name: Max Professional Furniture Polish

 

SECTION II-Hazardous Ingredients

Propane                                                 CAS#    74-98-6              TWA     1000                 % 0-10

Butane                                                   CAS#    106-97-8            TWA       800                 % 0-10

Aliphatic Petroleum Nafta                         CAS#    64742-30-9         TWA       200                 % 5-15

Mineral Oil                                            CAS#     8012-95-1            TWA  unknown              % 5-15

 

SECTION III-Physical Data

Boiling Point:                            182F               

Specific Gravity                          (H2O=1)= 0.90

Solubility in Water:                     Insoluble

Appearance:                                White liquid with lemon odor.

 

SECTION IV-Fire and Explosion Hazard Data

Flash Point:                               98 F  Extremely Flammable Level 3 Aerosol

Extinguishing Media:                   Water, CO2, Foam, And Dry Chemical

Special Fire Fighting Procedures:   Do not expose containers to temperatures above 120 F.

Unusual Fire and Explosion:         Forms flammable vapor air mixtures.  Lowers temperatures increases the difficulty of getting it to ignite.

 

SECTION V-Health Hazard and First Aid

Time Weighted Average (TWA):    200 ppm based in the raw material

Carcinogen:                                No

Acute Chronic Health Effects:        Excessive exposure may cause irritation to upper respiratory tract.  Excessive exposure may cause carboxyhemoglobinemia; theyÕre by impairing the bloods ability to transport oxygen. 

Primary Routes of Entry:              X Inhalation                   X Skin              X Ingestion

Effects of Overexposure:               Eyes- May cause pain, moderate eye irritation and slight corneal injury.  Vapors may irritate eyes. 

                                                Skin- May cause irritation.  Repeated contact may cause drying or flaking of skin. 

                                                Inhalation: In confined or poorly ventilated areas, vapors can readily accumulated and cause                                                      unconsciousness and death.

                                                Ingestion- May be harmful.

 

First Aid:                                   Eyes- Flush with water 15 minutes. If irritation persists, get medical attention.

                                                Skin- Wash with soap and water..

                                                Ingestion- Do not induce vomiting. Get medical attention immediately.

                                                Inhalation- Move to fresh air. Get medical attention.

SECTION VI-Reactivity Data

Stability:                                   Stable  X

Conditions to Avoid: Avoid open flames, welding arcs, or other high temperature sources, which induce thermal decomposition.   

Incompatibility: Strong oxidizers; caustics, chemically active metals such as aluminum, magnesium & sodium.

 

SECTION VII-S            pill or Leak Procedures

Steps to take in case material is released or spilled: use absorbent material and trade receptacle.  Waste disposal method Federal and Local regulations.

SECTION VIII-Special Protection Information

Respiratory Protection:                 Adequate ventilation

Gloves (type):                             Chemical resistant

Eye Protection:                           Glasses, if required

Other Protective equipment:          None

 

SECTION IX-Special Precautions

Precautions to be taken in handling and storing: Read and follow all label directions. Do not store container at temperatures above 120 F. Do not use near ignition sources.