MATERIAL SAFETY DATA SHEET

Essentially Similar to U.S. Department of Labor Form From OSHA

Revised: 02/14/12

HMIS Health_1 Flammability-4 Reactivity-0

Section 1 : Identification of Product

ManufacturerÕs Name: AVW INC.

24 Hour Emergency Phone Number: 800-424-9300

Product Name: Blow Off Electronic Cleaning Wipes

 

Section 2 : Hazardous components of Mixture

                                                                    %                        CAS No.

Isopropanol                                               30                            67-63-0

Laurtrimonium chloride                            0.05                         112-00-5 

Methylchloroisothiazolinone                   0.0009                     26172-55-4

Methylisothiazolinone                             0.0003                      2682-20-4

Benzyl alcohol                                        0.013                        100-51-6

Section 3 : Physical Data

Boiling point                              78.3-100¡C                          

Vapour pressure( mm Hg) N.A.                                        

Vapour density (Air=1)                 N.A.

Solubility in water                                   Soluble

Specific gravity (H20=1)               0.97

Percent volatile(by volume %)   N.A.

Evaporation (H20=1)                    >1

Appearance and odor : transparent liquid

Section 4 : Fire & Explosion Hazard Data

 

Flash point:>30¡C   

Fire extinguishing media: Foam extinguish

Special fire-fighting procedures: No special method necessary

Unusual fire & explosion hazards: None

Section 5 : Health Hazard Data

 

Threshold limit value:      No toxic effect known

Effects of overexposure     : No bad effect on human health under normal use

                                                  Intoxication may only result from massive ingestion

Emergency and first aid procedure: Eyes - Rinse with water

                                                     Consult medical advise

 Section 6 : Reactivity Data

 

Stability - Stable                        

Incompatibility (materials to avoid) - None

Hazardous decomposition products -None 

Hazardous polymersion - Will not occur

Condition to avoid - Excessive heat.

 

 Section 7 : Spill or leak procedures

 

Steps to be taken in case material is released or spilled : Wipe and  Rinse with water.

Waste disposal methods : - N.A.

Handling & Storage: Store in cool ventilated place

 

Section 8 : Special protection Information

 

Respiratory protection (specify type) - None required

Other protection equipment - None

 

Section 9: Special Precautions

 

Precautions to be taken in handling and storing - No specific measures

Keep out of eyes   Other precautions - Avoid prolonged contact with skin